Tire application in brief

 

All Yazd Tire products hold  the certificate to use   the national standard of Iran with the tracking code:8901923744

In order to use your vehicle tires properly for the longer lifetime of tires and avoid possible accidents The following safety advices and warnings are provided to you.

 

1-Monthly monitoring of tire pressure:

 Always adjust the tire pressure to the values set by the car manufacturer. Also, before your long-distance trips, control the pressure of your tires.

 

2-Tire Inspection:

 Continuously inspect your tires for wear, cracking, tear or any kind of damage in the tread and wall area.

 

3-Control of tread wear limit:

 Inside the grooves of tire tread there are several bars embedded, If the tread depth of your tire has reached to any of those bulges, or less than 1.6 mm you should change the tires immediately with new tires.

4-Safe loading:

Pay attention to the recommended limits of the load and tire pressure recommended by the car manufacturer. Never exceed the maximum load mentioned on your tire wall.

 

5-Driving at high speed:

 Follow the speed limit when driving. Set your speed based on road traffic, weather conditions, rainfall and road conditions and never exceed the speed for which your tires are designed for.

 

6-Use balanced rims:

Tubeless tires installed on the damaged, rusty and deformed rims, gradually lose their pressure, so then they will have the  conditions for flat tires. Driving on low tire pressure can quickly damage the tire and cause tire stitching from inside and tire bursting.

 

7-Winter tires:

Using winter tires in rainy/snowy weather upgrade road turns-vehicle control-driving safety  and braking. It is recommended that winter tires be fitted on the rear axle of the vehicle but  the use of winter tires for all wheels is a better option.

 

8-Changing tires on wheels:

The purpose of the tire displacement on every of wheels is to help uniform wearing of tires and minimizing the roughness in wear on the surface of their tread. Tires must be displaced every 8,000 kilometers driving. If your tire tread design is directional, displacement of tires should be done in such a way that its direction of motion does not change.

 

9-Substituting less than four tires:

 If the tread surface of your tires are worn and flattened, the possibility of water drainage at contact surface of tire with road decreases, and because of the low friction of the tire with the road surface the car goes out of control, during road turns. So if you buy less than four new tires, It is better to install these tires on the rear axle. It’s obvious that, the tread depth of the rest of the tire should be appropriate and acceptable.

Several characteristics of Yazd Tire radial tires

 

1-The property of the water drainage from surface of the tire.

2-Exceptional power of gripping on wet and snowy roads.

3-Low noise and reduce fuel consumption

4-Excelent breaking performance.

5-Good steering response.

 

Tires manufactured by Yazd Rubber industries Complex that are distributed with Yazd Tire brand are guaranteed against all defects caused by production for three years after production date and covered by after sales services.

 

Every tire has a production date but the date of the expiration depends on its storage conditions, so the exact time is not mentioned.

 

.